The frame has an integrated Picatinny rail. A manual safety and slide release lever are optimally positioned above the thumb for easy manipulation. A refined element of the G3 is the 6-lb. trigger, designed with a smooth take-up and a surprisingly crisp, clean break exceeding that of typical striker-fired pistol trigger performance. A short reset promotes quick, controlled follow-up shots.
| Brand |
|---|
Related products
Taurus 1007031119 Spectrum Double 380 ACP 2.8" 6+1/7+1 Flat Dark Earth Polymer Grip Black Stainless Steel Taurus' Spectrum was desgined for concealed carry. This subcompact pistol weighs a hair over 10 ounces and carries six rounds in a flush-fitting magazine. The included extended magazine gives you an additional round and a little more surface area to the grip. It has low profile, fixed sights, a loaded chamber indicator, and an internal lock. A distinctive feature of the Spectrum is the polymer color accents located on the slide and grip. his model has a black polymer frame, black stainless steel slide, and flat dark earth soft touch overmolded color accents on the grip and slide. SPECIFICATIONS: Mfg Item Num: 1007031119 Category: PISTOLS Type :Pistol Action :Double Caliber :380 Automatic Colt Pistol (ACP) Barrel Length :2.8" Capacity :6+1/7+1 Safety : Grips :Flat Dark Earth Polymer Sight Configuration :Fixed Weight :10.2 oz Frame Finish :Black Frame Material :Polymer Barrel Type : Slide Description :Black Stainless Steel Case Type : Sight Style :Fixed
Pistols
• Precision, Button-Rifled Barrel• Micrometer Click Adjustable Target Rear Sight with Undercut Patridge Front Sight• Ergonomic Checkered Target Grips• Switch-Barrel Design Allows Both 5.5” and 7” Barrels on One Frame• Crisp Target Trigger Factor Set at 2.75 to 3.25 lbs.• User Adjustable Trigger StopThe Smith & Wesson Model 41 is the top of the line in rimfire pistols. Used by national level competitors for acute precision in competition, the Model 41 is considered one of the best .22 target pistols ever manufactured.
The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines. Specifications: Special Feature: Threaded Barrel Model Weight: 34.6 oz. # of Mags: 2 Overall Length: 8.5" Rate-of-Twist: 1-in-16" Additional Info: Magazine Disconnect Additional Info: Top & Bottom Picatinny Rails Additional Info: Ergonomic Bolt Stop
SCCY's CPX-2 is designed for concealed carry but large enough to get a good firm grip. It is considered to be one of the best priced, precision made "Pocket Pistols" on the market. Chambered for 9mm, it has a 3.1" barrel with a 16:1" right hand twist. The receiver is made from 7075 T6 aircraft grade heat treated aluminum alloy. The Zytel polymer frame features ergonomic finger grooves and an integral recoil cushion on the backstrap. The slide is machined from stainless steel with a Zytel overmolded polymer extension for ease of operation. It has 3-dot sights with a windage-adjustable rear. This DAO has an internal hammer with inertial firing pin to prevent accidental discharge. It has a smooth, consistent 9-pound trigger pull. It comes with two 10-round magazines with finger extensions bases installed and two flat magazine bases. This CPX-2 has a satin slide with a white frame.
The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines. Specifications: Spc Feature: Threaded Barrel Model Weight: 25 oz. # of Mags: 2 Overall Length: 8.4" Rate-of-Twist: 1-in-16" Addl. Info: Magazine Disconnect Addl. Info: Top & Bottom Picatinny Rails Addl. Info: Ergonomic Bolt Stop Drilled/Tapped: Yes
The APX Centurion pistol extends the proven APX Series to a concealed carry friendly mid-size, allowing for the end user to more easily IWB/AIWB carry the APX pistol. APX Centurion features a 15+1* (9MM) or 13+1* (.40S&W) flush fit magazine and can accept the full size APX magazines as well. Adapters available through the Beretta Pro Shop allow for the user to have a “flush” feeling full size magazine as well, allowing the pistol to have similar handling characteristics to the duty size pistol. As with the full size APX, the APX Centurion has been designed specifically for military and law enforcement users who have a need to carry concealed but want similar handling characteristics to their duty pistols. The APX Centurion features an end user removable serialized chassis and can be easily modified with replaceable grip frame housings and is simple to disassemble and maintain. Each APX Centurion comes with 3 interchangeable back straps so users can best fit their hands and preferences. The APX’s aggressive slide serrations make slide manipulations easy under any conditions. To accommodate right or left-handed use, the APX’s magazine release button can be easily reversed, and the slide stop is ambidextrous. The APX Centurion’s trigger breaks at 6lbs and has a clear tactile and audible very short reset. The APX truly is the ultimate striker fired pistol from Beretta. *Where legal. 10 round magazine SKUs available for restricted states. Caliber: 9mm Action: DA/SA Overall Length: 6.7" Overall Height: 5.2" Barrel Length: 3.7" Sight Radius: 6.3" Overall Width: 1.3" Grip Width: 1.3" Weight Unloaded: 22 oz Magazine Capacity: 15 Rounds
Pistols
Chambered in 9mm Luger, the new G2C pistols are built on a rugged polymer frame that includes aggressive stippling, ergonomically placed along the grip to ensure firearm retention and to maintain positive hand alignment for optimal accuracy. The compact profile (1.25" wide x 6.25" long x 5.0" tall) combined with the 12 round - (9mm Luger) capacity magazines' contoured grip extension delivers a solid, comfortable hold for small- or large-hand shooters. Operation of the G2C is straightforward, thanks to a striker-fire, double-action trigger system that includes restrike capability. A manual, external safety is located conveniently above the thumb for quick manipulation in stressful conditions. The reversible magazine release is also ergonomically positioned for rapid, one-hand mag drops during tactical mag changes. Integrated into the G2C frame is a Mil-STD 1913 Picatinny rail to accept an accessory light or a laser. The 9mm Luger G2C models are offered with either a matte black carbon steel slide or with a matte stainless-steel slide. The slide contours blend with the frame to promote a smooth, snag-free draw and re-holster. Precision-cut slide serrations provide a no-slip grip when charging the pistol. Topping the slide is a fixed white dot front sight and a dual white dot rear sight with elevation and windage adjustment. Specifications: Model: G2C Action: Semi-Auto Finish: Black Frame: Light Purple Polymer Weight: 21.2 oz. Caliber: 9mm Capacity: 12 + 1 # of Mags: 2 Barrel: 3.25" Overall Length: 6.25" Sights: White Dot Front, Adj. Rear Safety: Manual Safety Additional Info: No Internal Lock Additional Info: Picatinny Rail (Mil-STD 1913)
Precision built to be the most accurate and reliable firearms, M&P pistols are an experience you have to feel to believe. Durable and comfortable, they are capable of handling as many rounds as you are. Engineered with an attention to detail and superior ergonomics, M&P22 pistols connect the shooter with the shot. Ideally suited for training or target shooting, this semi-automatic compact pistol maintains standard M&P pistol design features and includes a few extras. Two 10 round magazines are included. Specifications: Weight: 15.3 oz. # of Mags: 2 Overall Length: 6.65" Additional Info: Picatinny-Style Accessory Rail Additional Info: Magazine Safety Additional Info: Takes 3/8x24 to 1/2x28 Adapter