A refined element of the G3 is the 6-lb. trigger, designed with a smooth take-up and a surprisingly crisp, clean break exceeding that of typical striker-fired pistol trigger performance. A short reset promotes quick, controlled follow-up shots.
| Brand |
|---|
Related products
REMINGTON HANDGUNS R1 Tactical Remington Firearms 96488 1911 R1 Single 45 ACP 5" 15+1 Black G10 Grip Black Stainless Steel Remington's 1911 R1 Tactical pistol features a match grade adjustable trigger, Trijicon rear and front sights, stainless steel slide and frame with a black finish, and G10 grips. This model also features a 5" match grade threaded barrel, ambidextrous extended thumb safety, and an accessory rail. SPECIFICATIONS: Mfg Item Num: 96488 Category: PISTOLS Type :Pistol Action :Single Caliber :45 Automatic Colt Pistol (ACP) Barrel Length :5" Capacity :15+1 Safety :Ambidextrous Thumb Grips :Black G10 Sight Configuration :Trijicon Front/Rear Weight :41 oz Frame Finish :Black Frame Material :Stainless Steel Barrel Type :Match Grade Slide Description :Black Stainless Steel
SCCY's CPX-2 is designed for concealed carry but large enough to get a good firm grip. It is considered to be one of the best priced, precision made "Pocket Pistols" on the market. Chambered for 9mm, it has a 3.1" barrel with a 16:1" right hand twist. The receiver is made from 7075 T6 aircraft grade heat treated aluminum alloy. The Zytel polymer frame features ergonomic finger grooves and an integral recoil cushion on the backstrap. The slide is machined from stainless steel with a Zytel overmolded polymer extension for ease of operation. It has 3-dot sights with a windage-adjustable rear. This DAO has an internal hammer with inertial firing pin to prevent accidental discharge. It has a smooth, consistent 9-pound trigger pull. It comes with two 10-round magazines with finger extensions bases installed and two flat magazine bases. This CPX-2 has a satin slide with a white frame.
The P320-M17 is a 9mm, striker-fired pistol and comes with two 17-round magazines. The pistol features a coyote-tan PVD coated stainless steel slide with the same optic cut as specified by the MHS contract, and black controls just like the pistols currently being shipped to the U.S. Army; it comes equipped with a SIGLITE front night sight and removable Night Sight rear plate. Specifications: Weight: 29.6 oz. # of Mags: 2 Overall Length: 8" Additional Info: Carry Length Grip Module Additional Info: Optic Ready Removable Plate Additional Info: Short Tactile Reset Trigger
The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines. Specifications: Special Feature: Threaded Barrel Model Weight: 34.6 oz. # of Mags: 2 Overall Length: 8.5" Rate-of-Twist: 1-in-16" Additional Info: Magazine Disconnect Additional Info: Top & Bottom Picatinny Rails Additional Info: Ergonomic Bolt Stop
Brand Smith & Wesson Category Pistols Caliber 9mm Luger Model M&P 9 Series M2.0 Compact Frame Finish Black Action DAO Barrel Length Range 4" to 4.99" Slide Description Black Armornite Stainless Steel Capacity 15+1 Frame Description Black Polymer Grips Black Interchangeable Backstrap OAL 7.30" Safety No Manual Sight Configuration 3 Dot White Sight Style Contrast Weight 24 oz
The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines. Specifications: Spc Feature: Threaded Barrel Model Weight: 25 oz. # of Mags: 2 Overall Length: 8.4" Rate-of-Twist: 1-in-16" Addl. Info: Magazine Disconnect Addl. Info: Top & Bottom Picatinny Rails Addl. Info: Ergonomic Bolt Stop Drilled/Tapped: Yes
SIG pistols are engineered for reliable performance in harsh environments and under the most demanding conditions. Often the choice of law-enforcement, military, and lettered government agencies, SIG firearms stand out among the competition. The P238 is a micro-compact built for the concealed-carry market. Chambered in 380 ACP, the P238 boasts an all-metal frame, a machined aluminum trigger, an extended magwell, a Cerakote Elite Legion Gray stainless steel slide, G-10 grips, and SigLite night sights. This pistol comes standard with three 7-round magazines.
Pistols
The new PPS M2 is everything you’re looking for in a compact handgun. The slim profile, push button magazine release, smooth trigger pull and Carl Walther signature ergonomics deliver the features that you want from Walther and are housed in a frame that fits just about anyone.All PPS M2 Models chambered in 9mm come with 2 magazines. (1×6 round & 1×7 round) Specifications: Brand Walther Arms Category Pistols Caliber 9mm Luger Model PPS Series M2 Type Pistol Frame Finish Black Action SA / DA Barrel Length Range 3.00" to 3.99" Slide Description Black Tenifer Capacity 7+1 Frame Material Polymer Grips Black Polymer OAL 6.30" Safety Trigger Sight Configuration 3-Dot Adj Rear Sight Style Contrast Weight 21.10 oz Barrel Type Polygonal Rifled <span id="XinhaEditingPostion"></span>