Ruger PC Carbine 9mm 16.1″ Free Float MLOK Collapsible Stock 17
The Ruger PC Carbine is a take-down pistol-caliber carbine chambered
in 9mm. (This rifle is very similar to a Ruger 10/22 takedown, both
in operation and disassembly.) It comes standard with innovative
features such as a custom “dead blow” tungsten weight which
shortens bolt travel and simultaneously reduces both felt recoil and
muzzle rise. It also has an ambidextrous charging handle, an
adjustable LOP, and two interchangeable magazine wells, one which
accepts Ruger SR-Series and the new Ruger Security 9 mags, and
another which accepts Glock mags. The bolt is machined from heat
treated, chrome-moly steel to ensure strength, structural integrity
and durability. Takedown is as simple as locking the bolt back,
verifying that the rifle is unloaded, pushing a recessed lever,
twisting the sub-assemblies and pulling them apart.Stock Black Synthetic
Chassis with
Aluminum Free-Float
Handguard
Capacity 17
Barrel Length 16.12″
Overall Length 32.25″ – 35.50″
Barrel Feature Threaded, Fluted
Front Sight None
Rear Sight None
Thread Pattern 1/2″-28
Weight 7.3 lb.
Length of Pull 10.50″ – 13.75″
Material Aluminum Alloy
Finish Type III Hardcoat
Anodized
Twist 1:10″ RH
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Be the first to review “Ruger PC Carbine 9mm 16.1″ Free Float MLOK Collapsible Stock 17”
Related products
Caliber: 454 Casull Action: Double / Single Action Finish: Stainless Length: 10.5" Safety: Transfer Bar Sights: Adjustable Rear/Red Ramp Front StockFrame: Rubber Grips
Ruger's Mark IV features a simple, one-button takedown for quick and easy field-stripping and proper chamber to muzzle cleaning. The recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. Its internal cylindrical bolt construction ensures permanent sight to barrel alignment, while the contoured ejection port and easy-to-grasp bolt ears allow for durable and reliable operation. The accurate sighting system features a drilled and tapped receiver for Weaver- or Picatinny-style rail. The Mark IV is a single action and utilizes an ambidextrous manual safety, push-button magazine release located on the left side, and an ergonomic bolt stop. Included is a washer and two magazines. This 22/45 Lite model features an aerospace-grade aluminum, ventilated receiver with a black anodized finish. It also has a threaded 4.4" barrel, black polymer grip frame, checkered 1911-style grip, and a fixed front sight with an adjustable rear.
The Do-It-All 22 pistol for the shooter who appreciates style and demands reliability! Ambidextrous Manual Thumb Safety/Decocking Lever and Magazine Release. Fixed White Dot Front Sight, Adjustable Rear Sight and Reversible Blade. Picatinny Rail with Multiple Cross Slots for Variable Mounting of Accessories. Packed with versatile features, the SR22® is lightweight (just 17.5 ounces) and perfect for just about anything - plinking, target shooting and even small game hunting. It is easy to field strip, fun to shoot, and will run reliably with a wide variety of ammunition (not just high-velocity ammunition).
Handguns
Original Old West Single-Action Look, Size and Feel. Since its introduction in 1993, the Ruger Vaquero® has dominated the cowboy action shooting world and earned its reputation for rugged reliability due to its strength and mechanical superiority. It is often referred to as "the gun that won the New West" because of its widespread popularity among single-action shooters and cowboy action competitors. The Ruger Vaquero combines the original Old West single-action look and feel with new features. The mid-size steel frame and cylinder are scaled-down to the same size as the original 1955 Ruger Blackhawk®, closely resembling the classic single-action revolvers of the late 1800's.
Caliber: 380 ACP Action: Semi-Auto Barrel: 2.75" Capacity: 6 1 Finish: Stainless Steel Length: 5.16" Sights: Fixed Front & Rear
Handguns
Trigger features a short takeup with positive reset. Recoil-reducing barrel cam, low mass slide, low center of gravity and low bore axis. Performance tested for sustained P ammunition use. Genuine Novak® LoMount Carry three-dot sights. Modular wrap-around grip system for adjusting palm swell and trigger reach. Safe, easy takedown with no tools or trigger pull required. Ambidextrous slide stop and magazine release allow actuation with either hand. Safety features include internal, automatic sear block system, integrated trigger safety and no trigger pull required for takedown. Also includes - Two nickel-teflon® plated steel magazines; medium and large grip modules; hard plastic case.
The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines. Specifications: OAL: 9.75" Weight: 42.8 oz
Reviews
There are no reviews yet.